快速建立個人常用詞庫-AutoHotkey 熱字串小工具:HotString Helper(AHK #3)

HotString Helper(熱字串助手)是一個 AutoHotkey 的熱鍵腳本程式,按一個鍵就能把選取好的文字加入自己使用的腳本裡,並且不需重載能立即生效,對於需要新增眾多熱字串的朋友們是個不可多得的簡單工具。

HotString Helper 的腳本能由 AutoHotkey 的說明網頁热字串 - 定义与使用 | AutoHotkey裡找到。

腳本程式

#h::  ; Win+H hotkey
    ; Get the text currently selected. The clipboard is used instead of
    ; "ControlGet Selected" because it works in a greater variety of editors
    ; (namely word processors).  Save the current clipboard contents to be
    ; restored later. Although this handles only plain text, it seems better
    ; than nothing:
    AutoTrim Off  ; Retain any leading and trailing whitespace on the clipboard.
    ClipboardOld := ClipboardAll
    Clipboard := ""  ; Must start off blank for detection to work.
    Send ^c
    ClipWait 1
    if ErrorLevel  ; ClipWait timed out.
        return
    ; Replace CRLF and/or LF with `n for use in a "send-raw" hotstring:
    ; The same is done for any other characters that might otherwise
    ; be a problem in raw mode:
    StringReplace, Hotstring, Clipboard, ``, ````, All  ; Do this replacement first to avoid interfering with the others below.
    StringReplace, Hotstring, Hotstring, `r`n, ``r, All  ; Using `r works better than `n in MS Word, etc.
    StringReplace, Hotstring, Hotstring, `n, ``r, All
    StringReplace, Hotstring, Hotstring, %A_Tab%, ``t, All
    StringReplace, Hotstring, Hotstring, `;, ```;, All
    Clipboard := ClipboardOld  ; Restore previous contents of clipboard.
    ; This will move the InputBox's caret to a more friendly position:
    SetTimer, MoveCaret, 10
    ; Show the InputBox, providing the default hotstring:
    InputBox, Hotstring, New Hotstring, Type your abreviation at the indicated insertion point. You can also edit the replacement text if you wish.`n`nExample entry: :R:btw`::by the way,,,,,,,, :R:`::%Hotstring%
        if ErrorLevel  ; The user pressed Cancel.
        return
    if InStr(Hotstring, ":R`:::")
    {
        MsgBox You didn't provide an abbreviation. The hotstring has not been added.
        return
    }
    ; Otherwise, add the hotstring and reload the script:
    FileAppend, `n%Hotstring%, %A_ScriptFullPath%  ; Put a `n at the beginning in case file lacks a blank line at its end.
    Reload
    Sleep 200 ; If successful, the reload will close this instance during the Sleep, so the line below will never be reached.
    MsgBox, 4,, The hotstring just added appears to be improperly formatted.  Would you like to open the script for editing? Note that the bad hotstring is at the bottom of the script.
    IfMsgBox, Yes, Edit
        return

MoveCaret:
    IfWinNotActive, New Hotstring
        return
    ; Otherwise, move the InputBox's insertion point to where the user will type the abbreviation.
    Send {Home}{Right 3}
    SetTimer, MoveCaret, Off
return

操作步驟

操作的步驟很簡單:

  1. 選取要加入腳本檔的文字
  2. 按[Win+h]
  3. 在彈出的對話窗輸入熱字串的鍵值
  4. 按確定

接著就能直接使用這個剛入的熱字串了。如果開啟你的腳本檔,即能發現熱字串的指令已經加進去了。

說明與示範影片

##

您可能也會有興趣的類似文章

簡睿

服務於軟體業的資訊老兵。興趣廣泛,學習力佳,樂於分享所知所學。

您可能也會喜歡…

發佈留言

發佈留言必須填寫的電子郵件地址不會公開。 必填欄位標示為 *